/*
Fenil Chandarana
Fab Academy 2022
Webpage link: https://fabacademy.org/2022/labs/vigyanashram/students/fenil-chandarana/
*/

/*
  AnalogReadSerial

  Reads an analog input on pin 0, prints the result to the Serial Monitor.
  Graphical representation is available using Serial Plotter (Tools > Serial Plotter menu).
  Attach the center pin of a potentiometer to pin A0, and the outside pins to +5V and ground.

  This example code is in the public domain.

  https://www.arduino.cc/en/Tutorial/BuiltInExamples/AnalogReadSerial
*/

#include <SoftwareSerial.h>

SoftwareSerial mySerial(1, 0); // RX, TX

// the setup routine runs once when you press reset:
void setup() {
  // initialize serial communication at 9600 bits per second:
  mySerial.begin(9600);
}

// the loop routine runs over and over again forever:
void loop() {
  // read the input on analog pin 0:
  int sensorValue = analogRead(2);
  // print out the value you read:
  mySerial.println(sensorValue);
  delay(1);        // delay in between reads for stability
}